Registered UsersSign In
View CartView RFQ'sExpress Ordering  | Shipping 
 | Tax 
 | Terms 
 Shopping Cart  0 Items 
 Request for Quote  0 Items 
All Categories > Accumulator Products > HYDAC Accumulator Charging Kits > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

HYDAC Accumulator Charging Kits

Check up to five results to perform an action.

HYDAC™ Accumulator Charging Kits

larger image

To maintain system performance, it is recommended that the gas precharge pressure in your accumulators be checked regularly. A loss in the gas precharge pressure will cause a drop in the system efficiency and could cause damage to the accumulator bladder, diaphragm, or piston.

These charging and gauging units allow hydro-pneumatic accumulators to be charged with dry nitrogen. For this purpose, a charging and gauging unit is connected to a commercially available nitrogen bottle via a flexible charging hose (8 feet/2.44m).

These units allow maintenance personnel to check the current gas precharge pressure of an accumulator and also incorporate a gauge and check valve in the charging connection, and a manual bleed valve with a T-handle. Operating and installation instructions are included with each charging kit.

The FPK250 kit also has Adapters for different connections.

Warning: To avoid injury use a Pressure Regulator on your nitrogen bottle when charging an accumulator with a charging kit.

Request InformationCompare Items   Results Per Page : 
  Results 1 - 2 of 2 1 

Item #


Gas Valve Version

Pressure Range


HC-FPK250 For gas valve Version 1 (M28x1.5) 1 0 to 3500 PSI
0 to 250 Bar
HC-FPS250 For gas valve Version 4 (8VI-ISO 4570) 4 (Bottom repairable bladder accumulator) N/A $461.54
  Results 1 - 2 of 2 1