Universal application for cleaning hose, tube, pipe and assemblies. Removes fine particles of loose contamination and can also be used for product purging.
The projectile cleans by being compressed against the internal surface of the hose, tube or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the internal diameter of the hose, tube or pipe. For instance, a 2” (50mm) projectile is recommended for a 1-1/2” (38mm) hose.
Individual circumstances may require a smaller or larger projectile. If the projectile is too large it will not leave the nozzle, and if it is too small it will not clean effectively. The enormous variety in the types of couplings available today could ...
For use with all types of tubing or pipes - and strongly recommended for stainless steel - with mild to medium amounts of contamination, surface rust or scale build-up. Ideal for removing mandrel lubricants, grease and oil after the bending process.
The Tube style foam is denser than the standard Ultra Clean style foam and resists friction much better. Because of this, Tube Foam works much better on Stainless Steel applications.
The projectile cleans by being compressed against the internal surface of the hose, tube or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the internal diameter of the hose, tube or pipe. For instance, a 2” (50mm) projectile is recommended for a ...
The Clean Seal System utilizes heat shrink technology to encapsulate the end of a hose or tube assembly with a Clean Seal Capsule. This eliminates possible re-contamination that is problematic with traditional capping and plugging methods.
Re-contamination occurs when ill-fitting caps and plugs are forced onto assemblies, causing plastic particles to shear off into the hose or tube. The Clean Seal System leaves your assemblies 100% contamination free, and provides an easier, less costly, and more effective solution than traditional capping methods. You’ll never have to deal with an excessive cap and plug inventory again!
The Clean Seal Capsules are heat-shrinkable capsules used to seal assemblies up to 2” ID. Each capsule has a simple, clean pull-tab for easy removal. No particulates get left in the assembly and only 11 capsule sizes will handle all assemblies up through -32 (2”)!
(For use with the Clean Seal System and Heat Shrink Gun)
For anyone working with high-volume hose or tube cleaning operations, the JetLoad offers a simple solution for cleaning tubes & hoses. Designed with a trap door, JetLoad allows users to quickly load foam projectiles for removal of deposits, residue or sediments.
Nozzles are available for cleaning any tube/pipe/hose from 3/16" (4.8 mm) to 2" (51 mm) ID. Hose nozzles are tapered to fit inside the ends of the hose. JIC nozzles are available for thorough cleaning of hoses with couplings. Tube nozzles fit over the ends of tubes and pipes for complete end-to-end cleaning.