Registered UsersSign In
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Diagnostic Quick Connects  
 

Diagnostic Quick Connects


Click on a category to drill down.

Pressure Test Couplings - Test 20 (M16x2)

Pressure Test Coupling - Test 20 (M16x2)

(27)

Male coupling designed for monitoring and control of pressure. Test point connection is M16x2.0. Advantages to using the Test 20 coupling are system testing at working pressure, leakproof before ball check is open, protective cap, and minimizes introduction of contamination in hydraulic system. 

Use in conjunction with the Direct Gauge Adapter.

Specifications:

  • Material: Steel or Stainless steel options
  • Seal: Viton
  • Maximum Working Pressure: 9137 PSI ...
Direct Gauge Adaptors

Direct Gauge Adaptors (M16x2)

(5)

The direct gauge adaptor is designed to make the gauge connection to a pressure test coupling safe, effortless, and spill-free. The female swivel end of the direct gauge adaptor is a M16x2 connection.

Use in conjunction with the M16x2 test connector (Test Point).

Specifications:

  • Material: Steel
  • Maximum Working Pressure: 9137 PSI (630 bar)
  • Connect Under Pressure: 5800 PSI (400 bar)
  • Temperature Rating: -4 ...
Pressure Test Coupling With 90 Degree Elbow

Pressure Test Coupling With 90° Elbow Connection - Test 20 (M16x2)


It can be installed at any point of the hydraulic system were pressures needs to be monitored. The system is designed and manufactures according to ISO 15171-2 and is fully interchangeable with several other brands. Both male and female swivel ends have a M16x2 connection.

Specifications:

  • Material: Steel
  • Maximum Working Pressure: 9000 PSI (600 bar)
  • Connect Under Pressure: 5800 PSI (400 bar)
  • Temperature Rating: -4 to +212˚F (-20 to +100˚C)
  • Media: Suitable for hydraulic oils and other mineral based fluids
Hose Unions - Test 20 (M16x2)

Hose Unions - Test 20 (M16x2)


The hose union is used to join two microbore hose assemblies together, or to connect a microbore hose end to a direct gauge adaptor. Both male ends have a M16x2 connection.

Specifications:

  • Material: Steel
  • Maximum Working Pressure: 9137 PSI (630 bar)
  • Connect Under Pressure: 5800 PSI (400 bar)
  • Temperature Rating: -4 to +212˚F (-20 to +100˚C)
  • Media: Suitable for hydraulic oils and other mineral based fluids
Hose/Gauge Bulkhead Adaptors - Test 20 (M16x2)

Hose/Gauge Bulkhead Adaptors - Test 20 (M16x2)

(3)

The hose/gauge bulkhead adaptor makes it convenient for you to "solid mount" a pressure gauge to a console or bulkhead. The microbore hose assembly conveniently screws onto the bulkhead adaptor. The male bulkhead side has a M16x2 connection. 

Specifications:

  • Material: Steel
  • Maximum Working Pressure: 9137 PSI (630 bar)
  • Connect Under Pressure: 5800 PSI (400 bar)
  • Temperature Rating: -4 to +212˚F (-20 to +100˚C)
  • Media: Suitable ...
JCB Test Points

Test 20 Conversion Adapter - M16x2 to 5/8"-14 BSF (HSP)

(2)

This adapter has been constructed to enable an adaptation between the 5/8"-14 BSF system (HSP) to the world wide used M16x2 system. Just screw our adapter onto the HSP - test coupling. The result is a regular M16x2 system connection. Now you can use your hoses and fittings from the M16x2 system. 

Specifications:

  • Material: Steel
  • Surface: Zinc nickel, transparent, CrVI-free 
  • Pressure rating: 9000 PSI (630 bar)
  • Temperature rating: -4 to 212˚F (-20 to 100˚C)
  • Media: Hydraulic oils and mineral based fluids

Compatible with JCB machines.

Microbore Hose Assemblies - Test 20 (M16x2)

Microbore Hose Assembly - Test 20 (M16x2)

(8)

There may be times when you want to check your hydraulic system's pressure but the test connector is too close to a moving part, making the task too dangerous. Or perhaps you might want to sit in the operator's seat of a piece of mobile equipment to monitor the machine's performance. Either way, the microbore hose assembly is designed to make remote pressure observation safe and convenient.

Measuring approximately 1/4" (5mm) in diameter and extremely lightweight, microbore hose is available in various lengths for your convenience and connects to any STAUFF® Test 20 (M16x2) ...

Microbore Hose_NPT

Microbore Hose Assembly - 1/4" NPT Male

(7)

There may be times when you want to check your hydraulic system's pressure but the test connector is too close to a moving part, making the task too dangerous. Or perhaps you might want to sit in the operator's seat of a piece of mobile equipment to monitor the machine's performance. Either way, the microbore hose assembly is designed to make remote pressure observation safe and convenient.

Measuring approximately 1/4" (5mm) in outside diameter and extremely lightweight, microbore hose is available in various lengths for your convenience and comes equipped with 1/4" NPT male fittings.

Specifications:

  • Nominal Bore: DN 2
  • Maximum Working Pressure: 9000 PSI (630 bar) ...
PD Series - Test Nipples

PD Series - Test Nipples

(12)

PD Series couplings provide easy connection for pressure gauges and/or specialized diagnostic equipment.

Typically PD nipples are permanently mounted in the system at threaded test ports, in rigid tubing, or in hose assemblies. PD couplers are then attached to test instruments.

Used in conjunction with the PD Series Test Coupler. Compatible with John Deere, Genie, and Caterpillar®.

Features:

  • Flush-face poppet valves minimize air inclusion and spillage, provide easy-to-clean surfaces, ...
PD Series - Test Couplings

PD Series - Test Coupler

(3)

The PD Series test coupler is designed to make the gauge connection to a PD Series test nipple, safe, effortless and spill-free!

Screw the test coupler directly onto the 1/4" NPT connection on your pressure gauge for quick, easy pressure readings from any test nipple.

Used in conjunction with the PD Series Test Nipple. Compatible with John Deere, Genie, and Caterpillar®.

Features:

  • Flush-face poppet valves minimize air inclusion and spillage, provide easy-to-clean surfaces, and help to ...
Snap-Check Pressure Testing Nipples

Snap-Check Pressure Testing Nipples

(11)

The Snap-Check pressure testing system, monitors and diagnoses fluid power systems in a snap. Snap-Check identifies operating pressure surges without the need for a permanently mounted gauge. Applications include mobile equipment, injection molding machines, oil and gas equipment, marine vessels and production machinery.

The Snap-Check test nipples have a maximum working pressure of 8700 PSI (600 bar). This ensures extra long, leak-free service and unsurpassed reliability. The system can also be connected under pressure up to 4350 PSI (300 bar) on the nipple side and is available with UNF, NPT, BSPP, BSPT, and metric threads. Nipples come with red dust caps to keep them clean and prevent dirt from entering your hydraulic ...

Snap-Check Pressure Test Couplings

Snap-Check Pressure Test Couplers

(2)

Snap-Check identifies operating pressure surges without the need for a permanently mounted gauge. Applications include mobile equipment, injection molding machines, oil and gas equipment, marine vessels and production machinery.

The Snap-Check test couplers have a maximum working pressure of 8700 PSI (600 bar). This ensures extra long, leak-free service and unsurpassed reliability. The system can also be connected under pressure up to 4350 PSI (300 bar) on the coupling side. Couplers come with red dust caps to keep them clean and prevent dirt from entering your hydraulic system.

Use in conjunction with the ...

System 100 Nipple

TEMA System 100 Diagnostic Nipples

(5)

Thanks to their advanced design, the diagnostic nipples are reliable components in the System 100 measuring device. They are made of hardened steel. The diagnostic nipples are maintenance free and are designed for temperatures from -40°F to 230°F (-40°C to +110°C). The integrated stop valve seals up to a 90 % vacuum. All mechanical parts in the diagnostic nipple are made of corrosion proof materials. An O-ring is integrated in the thread of the measuring nipple as a seal. Comes equipped with a dust cap.

Use in conjunction with the ...

System 100 Coupler

TEMA System 100 Diagnostic Couplers

(2)

Thanks to their advanced design, the diagnostic couplers are reliable components in the System 100 measuring device. They are made of hardened steel. The diagnostic couplers are maintenance free and are designed for temperatures from -40°F to 230°F (-40°C to +110°C). All mechanical parts in the diagnostic coupler are made of corrosion proof materials.

Use in conjunction with the TEMA System 100 Diagnostic Nipples. Compatible with older Volvo® and some Samsung® ...

Test 20 Adapters

Test Points and Microbore Hoses, Test 20, M16x2, EMA


Test 12

Test Points and Microbore Hoses, Test 12, S12.65x1.5, 1215